Home store site map
Bookmark and Share
Affordable Wiring Solutions
Base dimensions
AutomationDirect strongly recommends the use of ZIPLink cables and wiring modules, which eliminate the need for hand wiring of I/O modules to terminal blocks. In fact, many of the Productivity3000 I/O modules do not include the terminal board for direct connection of I/O. In particular, the high-density (32-point and 64-point) modules require the use of the ZIPLink cables.
ZipLink Module

ZIPLink Module
Ziplink Cable

ZIPLink Pre-Wired
Terminal Block Cable
ZipLink Pigtail

ZIPLink Pigtail Cable
Note: ZIPLinks are available for most, but not all I/O modules. See the selection matrix below.

comments powered by Disqus