DirectLOGIC PLCs - the most practical PLCs in the industry......from AutomationDirect go back to Do-more home AutomationDirect online store

Spend Less; Do More

Do-more™ PLC: Analog I/O Modules

The modules shown below are for Do-more H2 series. For T1H series click here.

Several bases & modules are available for the DL205 | Download DL205 Specs (pdf - 29.2 MB)

Analog I/O
DL205 Analog I/O
The DL205 series hardware line offers a wide variety of analog modules, including thermocouple (16-bit) and RTD (16-bit). The modules support an incredible range of signals including 4-20 mA (sinking and sourcing), 0-5 V, 0-10 V, -5 V to +5 V, and -10 V to +10 V, allowing the controller to connect to almost any device including pressure transmitters, proportional valves, AC drives, panel meters and more. The 16-bit thermocouple module can also be configured to measure 16-bit input signals of -5 to +5 VDC, 0-156 mv, -156 mv to +156 mv.

Available modules include:

Analog Input Modules




Check-out all the Do-more™ Videos

  The Do-more Way
  Do-more Designer Software
  Do-more Ethernet I/O
  Do-more Motion Control Videos
  Do-more with ViewMarq Message Display

User Application Stories
Encompassing all AutomationDirect PLCs


Helpful PLC guides

 

 

Analog Output Modules


Analog Combination Input/Output modules

  • F2-8AD4AD1F2-8AD4DA-1 [$Call]
    8 channel analog input module and 4 channel analog output module. [specs PDF]
    Inputs: Selectable 16 bit, 14-bit, or 12-bit resolution, range: 0-20 mA.
    Outputs: 16 bit resolution, range: 4-20 mA, current sourcing.
    Note: Product is not supported by D2-250 CPUs. Use with D2-250-1 with FW V4.40 or greater; or, D2-260 with FW V2.20 or greater.
  • F2-8AD4DAF2-8AD4DA-2 [$Call]
    8 channel analog input module and 4 channel analog output module. [specs PDF]
    Inputs: Selectable 16 bit, 14-bit, or 12-bit resolution, range: 0-5 VDC, 0-10 VDC.
    Outputs: 0-5 VDC at 15 bit resolution, 0-10 VDC at 16 bit resolution.
    Note: Product is not supported by D2-250 CPUs. Use with D2-250-1 with FW V4.40 or greater; or, D2-260 with FW V2.20 or greater.

Temperature

NOTES: New option modules may not be supported by CPUs purchased prior to the modules release.
Be sure to check for the latest firmware for your PLC. You can refer to the module specification page on our Web site for this information, or find it in our free catalog.
Here is the direct link to the Firmware Upgrade section of our Web site where you can find the firmware revision histories, the latest files and tools required to download the firmware into your CPU.

 

Copyright © AutomationDirect.com. All rights reserved.All prices are U.S. list prices.