It's not the smallest micro PLC, but it will put the biggest smile on your face! ...starting at $159.00
DirectLOGIC 105 Micro Programmable Logic Controller
- 10 inputs and eight outputs
- 2 K program memory
- 384 words data memory
- 91-instruction programming includes time or event-based drum sequencer, timed interrupt, immediate I/O, etc.
- 7 amp relay outputs
- One RS-232C communication port
- Removable terminal connectors
- Eight I/O configurations
- 110/ 220 VAC or 24 VDC power supply versions
- Built-in 24 VDC auxiliary power supply for field devices
- One RS-232C communication port
- DeviceNET slave I/O blocks
DeviceNET slaves offer affordable I/O nodes
Connect these DeviceNET slaves (F1-DVNET models) to any DeviceNET master for inexpensive nodes of I/O in the following configurations: DC in/Relay out, AC in/Relay out, and DC in/DC out. You get all the same macro I/O features - powerful relays, high-speed I/O modes, plus a built-in RS232 communications port for ASCII device interface. |
|
Helpful PLC guides
Helpful PLC guides
Use the DL105 micro PLC to:
- Build an electronic drum sequencer with 18 I/O and connect an operator interface without paying a high price
- Drive high-current (up to seven amps) loads with the AC/ relay model
- Use the high-speed I/O modes of a DC input or output model to perform counting or positioning tasks
NOTES: New option modules may not be supported by CPUs purchased prior to the modules release.
Be sure to check for the latest firmware for your PLC. You can refer to the module specification page on our Web site for this information, or find it in our free catalog.
Here is the direct link to the Firmware Upgrade section of our Web site where you can find the firmware revision histories, the latest files and tools required to download the firmware into your CPU. |
YEP 
NOPE 
