DirectLOGIC PLCs - the most practical PLCs in the industry......from AutomationDirect go back to DirectLOGIC home AutomationDirect online store

Bookmark and Share

DirectLOGIC 105 Programmable Logic Controller

purchase PLCs
Drag n' Drop PLC builder: DL06 PLC [check it out]
Go to our online store
Shop for PLCs now
Save now on automation products

Download DL105 specs PDF

It's not the smallest micro PLC, but it will put the biggest smile on your face! ...starting at $Call


DirectLOGIC 105 Micro Programmable Logic Controller

DL105

  • 10 inputs and eight outputs
  • 2 K program memory
  • 384 words data memory
  • 91-instruction programming includes time or event-based drum sequencer, timed interrupt, immediate I/O, etc.
  • 7 amp relay outputs
  • One RS-232C communication port
  • Removable terminal connectors
  • Eight I/O configurations
  • 110/ 220 VAC or 24 VDC power supply versions
  • Built-in 24 VDC auxiliary power supply for field devices
  • One RS-232C communication port

 

 

Helpful PLC guides

Use the DL105 micro PLC to:

  • Build an electronic drum sequencer with 18 I/O and connect an operator interface without paying a high price
  • Drive high-current (up to seven amps) loads with the AC/ relay model
  • Use the high-speed I/O modes of a DC input or output model to perform counting or positioning tasks

NOTES: New option modules may not be supported by CPUs purchased prior to the modules release.
Be sure to check for the latest firmware for your PLC. You can refer to the module specification page on our Web site for this information, or find it in our free catalog.
Here is the direct link to the Firmware Upgrade section of our Web site where you can find the firmware revision histories, the latest files and tools required to download the firmware into your CPU.

 

 

© 2014 AutomationDirect.com All rights reserved. All prices are U.S. list prices.Go to: AutomationDirect for most up-to-date prcing and product avialability.
E-mail contact: Comments/Suggestions/Web site problems