DirectLOGIC PLCs - the most practical PLCs in the industry......from AutomationDirect go back to DirectLOGIC home AutomationDirect online store

Bookmark and Share

DirectLOGIC 405 Programmable Logic Controller

Download DL405 specs PDF

Stay ahead by building on the past with a proven performer!

purchase PLCs
Drag n' Drop PLC builder: DL06 PLC [check it out]
Go to our online store
Shop for PLCs now
Save now on automation products


Our PLC prices are hard to beat!

DL405 PLCThe DirectLOGIC 405 PLC process control system from Koyo packs a lot of power for its size and price.
It is one of our most powerful PLC applications. The DL405 PLC control system has the one of the widest varieties of I/O modules and configurations of all our DirectLOGIC PLCs.

You can build a PLC controller system with local/distributed I/O of up to 3,500 points. Use the built-in PID instruction or specialty modules to perform cost-effective process control.

How the PID PLC Application Works:
PID (Proportional, integral, derivative) control: The control algorithm that is used to closely control processes such as temperature, mixture, position, and velocity.

The proportional portion takes care of the magnitude of the error.
The derivative compensates for the rate of error change.
The integral takes care of small errors over time.

The DL405 PLC controller system features include:

  • Three CPUs from 6.5 K memory with 1,152 I/O to 30.8 K memory with 3,584 possible I/O, with built-in power supply
  • Three base sizes
  • AC/DC in/out, up to 64 points
  • Ten amp relay out
  • 12-bit and 16-bit analog inputs and outputs
  • Thermocouple and RTD inputs
  • Data communications, including serial and Ethernet modules
  • High-speed counter input and pulse output
  • Serial remote I/O master and slave modules
  • Ethernet remote I/O master and slave base controllers
  • Slice I/O master and slave modules

Discrete modules in 8, 16, 32 and 64-point I/O densities

Use our ZIPLink pre-wired I/O cables and connector modules for easy wiring, especially to our 64-point DC modules.

Wide range of analog modules

Our analog I/O selection will give you the flexibility you need to perform low-cost process or data acquisition applications. We have 4, 8 and 16-channel models with input and output ranges such as 4-20 mA, 0-10 V, and bipolar ranges; isolated or non-isolated, 12 or 16-bit, thermocouple, RTD and millivolt modules. For example, our 8-channel F4-08AD analog input module offers eight channels of analog inputs and supports 4-20 mA, 0-20 mA, 0-5 V, 0-10 V, 1-5 V, +/-5 V, and +/-10 V (seven ranges) for a low price. For high-density analog, our F4-16AD-1 module supports 16 channels of current inputs at a low per-point cost.
Check our PLC System Specification Guide for a quick overview of all our analog modules.

Specialty modules to complete the system

Applications requiring the DL405's power and I/O count usually have some sort of special interfaces. See details on these modules (all documents are .pdf format):

NOTE: New option modules may not be supported by CPUs purchased prior to the modules release.
Be sure to check for the latest firmware for your PLC. You can refer to the module specification page on our Web site for this information, or find it in our free catalog.
Here is the direct link to the Firmware Upgrade section of our Web site where you can find the firmware revision histories, the latest files and tools required to download the firmware into your CPU.

For further details or specifications, select the desired product category and then select the "Products" tab and click on the product "Item Code" link, or select the "Technical Info" tab.

DirectSOFT (PC-DSOFT5) is our full-featured 32-bit Windows-certified programming package

It supports all five DirectLOGIC families of PLCs simultaneously, including all DL05s, DL105s, DL205 CPUs, DL305 CPUs, DL405 CPUs, and most of their Koyo cousins.
It supports an incredible array of on-line/off-line programming and documentation features. Use the PID screens for fill-in-the-blank setup and loop tuning.

NOTE: For further details or specifications, select the "Products" tab and click on the associated product Item Code link, or select the "Technical Info" tab.

Price Check

Below is just a sample of what we have. Click here for a complete listing of parts and prices for this product family, or click here to download a PDF of our complete price list.
Note: All prices are given in US $.

Product

Price

D4-430 CPU
6.5 K words total memory (3.5 K ladder - EEPROM, 3.0 K V-memory) RLL/ RLLPLUS programming. Built-in RS232C programming port and auxiliary RS232C/ RS422C port, includes 110/ 220 VAC power supply

$Call

D4-440 CPU
22.5 K words total memory (15.5 K ladder - RAM, UVPROM, or EEPROM, 7.0 K V-memory) RLL/ RLLPLUS programming.
Built-in RS232C programming port and auxiliary RS232C/ RS422C port, includes 110/ 220 VAC power supply. Requires memory cartridge, available in RAM, UVPROM, or EEPROM.

$Call

D4-450 CPU
30.8 K words maximum memory (15.5 K ladder - RAM, UVPROM, or EEPROM, 15.3 K V-memory) RLL/ RLLPLUS programming. Built-in RS232C programming port and auxiliary RS232C/ RS422C ports, includes 110/ 220 VAC power supply. You can add memory cartridge, available in RAM, UVPROM, or EEPROM. Includes support for up to 16 PID loops and floating point math.

$Call

Want to connect your DL405 and DL205 CPUs on an Ethernet network?

H4-ECOM-F Ethernet module with fiber connection

$Call

H4-ECOM100 10/100BaseT Ethernet module

$Call

© 2014 AutomationDirect.com All rights reserved. All prices are U.S. list prices.Go to: AutomationDirect for most up-to-date prcing and product avialability.
E-mail contact: Comments/Suggestions/Web site problems